|
|
|
|
 |
 |
|
|
|
|
|
(Single watercraft trailer shown with 480-12-B
tires)
|
Dixie
Craft Trailers, Inc. offers custom built trailers with many options
for your watercraft. Both our single and double capacity trailers
include many standard features that are not found in all of our competitors.
The winch stands and #1 Grade CCA treated bunks are fully adjustable
to accommodate all brands of personal watercraft. We use Sherwin
Williams Acrylic Enamel™ primer and paint with many colors to
choose from. |
| Buying
a Dixie Craft Trailer gives you the quality you desire at the value
you need. Our trailers are designed to last under many conditions.
Each trailer is equipped with above standard features for your safety
and convenience. The Class
III safety chains included on all our trailers is just one
way we are working to ensure a safer towing experience. See below
for more details on how we compare to our competition. |
(Double watercraft trailer shown with 530-12-C tires)
|
|
|
| |
|
|
|
Single
Watercraft Trailer (SHWCT) Features
|
Double
Watercraft Trailer (DHAL) Features
|
- Class II
coupler for 2" (two inch) trailer ball
- Class III
safety chains
- Wiring harness
end wrapped in flex guard loom and grounded
- Drag to keep
coupler off the ground when not attached to tow vehicle
- Handle for easy
lifting from tow vehicle
- Fully adjustable
winch stand to accommodate all brands of PWC
- 600 Lbs. (six
hundred pounds) capacity winch and winch strap with loop attachment
for small boat eyes
- 5" (five
inch) adjustable keel roller
- #1 CCA treated
bunks covered in soft marine grade carpet, fully adjustable to fit all
brands of PWC
- 1500 Lbs. (one
thousand five hundred pounds) capacity GVWR axle
- 5 Lug Studded
hubs, with grease fittings
- Heavy, two leaf,
double eye springs
- 3" (three
inch) structural channel frame
- D.O.T. approved
trailer lights
- Combination
tail light cover and tie down bracket
- One pair of
36" (thirty six inch) tie downs
- Sherwin Williams
Kem 400 Primer Coat
- Sherwin Williams
Kem 400 Paint with Hardener
- Standard color:
Black (see options below for more colors)
- 480-12-B tires
on 12" (twelve inch) round hole mod rims, computer balanced for
a smooth ride
|
- 10' (ten feet)
long carpeted center walk board for easy loading and unloading
- Class II
coupler for 2" (two inch) trailer ball
- Class III
safety chains
- Weld-on, swing-away
jack
- Wiring harness
end wrapped in flex guard loom and grounded
- Handle for easy
lifting from tow vehicle
- Fully adjustable
winch stand to accommodate all brands of PWC
- Two, 600 Lbs.
(six hundred pounds) capacity winches and winch straps with loop attachment
for small boat eyes
- #1 CCA treated
bunks covered in soft marine grade carpet, fully adjustable to fit all
brands of PWC
- 2500 Lbs. (two
thousand five hundred pounds) capacity GVWR axle
- 5 Lug Studded
hubs, with grease fittings
- Heavy, three
leaf, double eye springs
- 3" (three
inch) structural channel frame
- Waterproof D.O.T.
approved trailer lights
- Tail light protective
cover
- Two pair of
36" (thirty six inch) tie downs
- Sherwin Williams
Acrylic Enamel Primer Coat
- Sherwin Williams
Acrylic Enamel Paint with Hardener
- Standard color:
Black (see options below for more colors)
- 530-12-C tires
on 12" (twelve inch) round hole mod rims, also available with 20.5x8x10
B and C load range tires,
computer balanced for a smooth ride
|
| Options
for Single Watercraft Trailer (SHWCT) |
Options
for Double Watercraft Trailer (DHAL) |
- Sherwin Williams
Acrylic Enamel Paint colors available: white, gray, red, blue, green,
burgundy, purple, and yellow (please ask for additional colors)
- Hot-dipped galvanized
including axles, hubs and rims, and special coated springs
- Spare tire carrier
- Spare wheel
and tire
- Bolt-on swivel
tongue jack
- Bearing protectors
(unnecessary due to grease fitting in our hubs)
|
- Sherwin Williams
Acrylic Enamel Paint colors available: white, gray, red, blue, green,
burgundy, purple, and yellow (please ask for additional colors)
- Hot-dipped galvanized
including axles, hubs and rims, and special coated springs
- Spare tire carrier
- Spare wheel
and tire
- Bearing protectors
(unnecessary due to grease fitting in our hubs)
|
|
| How
does Dixie Craft Trailers, Inc. compare to our competition? |
Dixie Craft
Trailers, Inc. |
Most Competition
|
|
Class II
coupler for 2" trailer ball
|
Class I
coupler for 1 7/8" trailer ball
|
|
Class III
safety chains
|
Class I
safety chains
|
|
Flex guard
loom on wiring harness
|
N/A
|
|
Wiring harness
grounded
|
N/A
|
|
Drag to keep
coupler off the ground when not attached to tow vehicle
|
N/A
|
|
Handle for
easy lifting from tow vehicle
|
N/A
|
|
5" adjustable
keel roller (single trailers)
|
N/A
|
|
#1 Grade
treated lumber
|
#2 Grade,
some not treated
|
|
5 Lug stud
hub with lug nuts
|
4 or 5 Lug
hub with lug bolts
|
|
Grease fitting
in hub
|
N/A
|
|
Heavy, two
leaf, double eye springs
|
Slipper springs,
no shackles
|
|
3" structural
channel frame
|
Tubing, rust
from inside to outside
|
|
Tie-downs
|
Not included
|
|
Computer
balanced wheels
|
Not balanced
|
|
| |
 |
|
|
|
|
Home
•
Boat •
Pontoon
•
ATV •
Watercraft
• Contact
Us • Site
Index
|
